Blind - Hole Boards PCB Layout Design Back Drill Gold Finger
Plating Rogers
PCB Layout Design Description:
The PCB assembly we produce includes rapid turn prototype PCB
assembly, SMT/SMD assembly, through-hole assembly, hybrid
technology (SMT/through-hole), turnkey assembly, consignment
assembly, etc. They are widely used in industrial control, medical
care, automotive electronics, communications, and the Internet.
SMT, post welding, assembly to testing one-stop service supports
flexible supply.
PCB Layout Design Parameters:
| Item | Technical Parameter |
| Layer | 2-64 |
| Thickness | 0.5-17.5mm |
| Copper Thickness | 0.3-12 oz |
| Min Mechanical Hole | 0.1mm |
| Min Laser Hole | 0.075mm |
| HDI | 1+n+1,2+n+2,3+n+3 |
| Max Aspect Ratio | 20:01 |
| Max Board Size | 650mm*1130mm |
| Min Width/Space | 2.4/2.4mil |
| Min Outline Tolerance | ±0.1mm |
| Impedance Tolerance | ±5% |
| Min PP Thickness | 0.06mm |
| Bow &Twist | ≤0.5% |
| Materials | FR4,High-Tg FR4,Rogers, Nelco,RCC,PTFE, M4, M6,TU862,TU872 |
| Surface Finished | HASL, HASL Pb Free Immersion Gold/Tin/Silver Osp, Immersion
Gold+OSP |
| Special Capability | Gold Finger Plating, Peelable, Carbon ink |
PCB Layout Design Introduction:
The printed circuit board has good product consistency, and it can
adopt a standardized design, which is conducive to the realization
of mechanization and automation in the production process. At the
same time, the entire printed circuit board that has been assembled
and debugged can be used as an independent spare part, which is
convenient for the exchange and maintenance of the whole product.
At present, printed circuit boards have been widely used in the
manufacture of electronic products.
